TS101 Series Fixed Head
TS101 Series Fixed Head. 10” projection with 4” dock bumper; 22 oz. vinyl base fabric.
Quote Only
Industrial Access Equipment
TS200 Series Inflatable Fixed Head
TS200 Series Inflatable Fixed Head. 12” projection with 4” dock bumper – up to 22” projection available; 22 oz. vinyl base fabric.
Dock Seals & Pads Quote-based pricing
- One piece unitized construction
- 12” projection with 4” dock bumper – up to 22” projection available
- 22 oz. vinyl base fabric
- Standard head & side member face width is 12” – Full height guide stripe on side member face
- Side & Head Member Backing: 2x12 Pressure Treated Wood for 12” x 12” pads
Get pricing & availability
Expert help choosing the right configuration.
Spec guidance • Industrial use cases
Type
Dock Seals & Pads
Capacity
Request capacity guidance
Category
Loading Dock Equipment
Key Feature
One piece unitized construction
Product description
The TS200 series inflatable dock seal is designed in one piece for ease of installation and to maximize the tightest possible seal between interior & exterior environments for high volume traffic with consistent trailer widths & heights.
This three sided inflatable seal can be used in the same applications as the fixed head foam seal.
Two durable standard fabrics are offered as well as optional pleated wear surfaces and varying projections and size options to assure customer satisfaction.
An exterior blower motor with cover is standard.
MODELS AND BASE FABRIC: TS210 — 22 oz.
Vinyl ----- Medium usage TS230 — 16 oz.
For TS200 Series Inflatable Fixed Head, the catalog lists One piece unitized construction; 12” projection with 4” dock bumper – up to 22” projection available; 22 oz. vinyl base fabric. Match these details to the configuration being quoted; options and model variants may differ.
Product features
- One piece unitized construction
- 12” projection with 4” dock bumper – up to 22” projection available
- 22 oz. vinyl base fabric
- Standard head & side member face width is 12” – Full height guide stripe on side member face
- Side & Head Member Backing: 2x12 Pressure Treated Wood for 12” x 12” pads
- 7’6” between side pads at face
- Blower Motor: 1/3 HP, 115v with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch)
- Highly effective and energy saving inflatable seals against trailer after trailer is positioned – provides a tight seal upon inflation
- Accommodates high volume traffic with consistent trailer widths & heights
- Provides full unimpeded access to trailer interior for loading and unloading
- All pads have interior baffles inside fabric bag to assure retention of shape
- Air blower mounts easily over unit and comes with its own built in hood assembly
- Seal mounting frame is pressure treated lumber, kiln dried before & after treatment
- Full length yellow guide stripes to assist drivers in positioning of trailers
Selection considerations
- Confirm dock height, door opening and vehicle dimensions.
- Confirm the load and traffic pattern at the loading position.
- Confirm mounting conditions and required installation clearances.
Loading and unloading
Specifications
Readable, scan-friendly specs for fit and capacity.
| Category | Dock Seals & Pads |
|---|
Need help choosing the right equipment?
Tell us your requirements and we’ll recommend the best-fit configuration and provide pricing.
Related Products
More options from the same category and similar equipment.
TS101L Series Fixed Head “L” Side Pad
TS101L Series Fixed Head “L” Side Pad. Head pad over “L” side pads – Standard head pad projection 10” (always 4” less than side pads); Standard “L” style side pad 14” projection with 4” dock bumper.
TS103 Series Curtain Head
TS103 Series Curtain Head. Top of unit is sloped forward to promote water drainage & supported by wood 2"x 4" at wall; Head curtain drop of 24” over side pads.
TS103L Series Curtain Head “L” Side Pad
TS103L Series Curtain Head “L” Side Pad. Head curtain drop of 24” over “L” side pads; Standard “L” style side pad 14” projection with 4” dock bumper.
Explore More Categories
Category-first browsing helps you compare specs fast.
Related Articles
More resources that may help your equipment selection.
Explore More
Browse related equipment and request a quote when you’re ready.
Ready for pricing?
Send your requirements — we’ll follow up quickly with options and lead time.
FAQ
What details are listed for TS200 Series Inflatable Fixed Head?
The catalog lists One piece unitized construction; 12” projection with 4” dock bumper – up to 22” projection available; 22 oz. vinyl base fabric. Review the specification and feature sections, then confirm the selected configuration before ordering.
What should I check before selecting TS200 Series Inflatable Fixed Head?
For TS200 Series Inflatable Fixed Head, check dock height, door opening and vehicle dimensions; the load and traffic pattern at the loading position; mounting conditions and required installation clearances. Confirm suitability for your specific task with the equipment documentation.
How do I request a quote for TS200 Series Inflatable Fixed Head?
Use Request a Quote on this page and reference TS200 Series Inflatable Fixed Head. Include quantity, intended use, required configuration, delivery address and needed-by date. Pricing, availability and delivery are confirmed in the quote.