Dock Seal and Shelter Combination — D-150/650 Series
Dock Seal and Shelter Combination — D-150/650 Series. Listed models: D-150/650-10, D-150/650-11, D-150/650-12, D-150/650-13 and additional configurations; D-150/650-10 Projection: 10".
Quote Only
Industrial Access Equipment
Dock Seals
Three-piece dock seals for listed 8 × 8 ft or 8 × 9 ft door openings, with nylon-reinforced vinyl facing and chemically sealed ends. Match projection to the dock and vehicle interface.
Dock Seals & Pads Quote-based pricing
- Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon.
- Chemically sealed ends prevent moisture infiltration.
- Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes.
- Through the wall installation kits included.
- Three piece construction: top - 12" high; sides - beveled sides with 91/2" width at the wall and 12" width at the face. 5" maximum compression is recommended.
Get pricing & availability
Expert help choosing the right configuration.
Spec guidance • Industrial use cases
Type
Dock Seals & Pads
Capacity
Request capacity guidance
Category
Loading Dock Equipment
Key Feature
Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon.
Product description
These Dock Seals close the space around a loading opening using a three-piece assembly with a top section and beveled side sections. The listing identifies the D-150-XX series for an 8 ft wide by 8 ft high door and the D-350-XX series for an 8 ft wide by 9 ft high door.
The catalog specifies 36 oz nylon-reinforced vinyl facing, chemically sealed ends, a full-height air escape tunnel and wood mounting members. It recommends a maximum compression of 5 inches. Before choosing a projection, check the building face, bumper position and vehicle interface; the listing calls for a 20-inch projection where a flush dock is used with an Edge-O-Dock.
Product features
- Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon.
- Chemically sealed ends prevent moisture infiltration.
- Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes.
- Through the wall installation kits included.
- Three piece construction: top - 12" high; sides - beveled sides with 91/2" width at the wall and 12" width at the face. 5" maximum compression is recommended.
- Applications with a flush dock to building in conjunction with an Edge-O-Dock use a 20" projection Dock Seal.
Selection considerations
- Confirm dock height, door opening and vehicle dimensions.
- Confirm the load and traffic pattern at the loading position.
- Confirm mounting conditions and required installation clearances.
Loading and unloading
Specifications
Readable, scan-friendly specs for fit and capacity.
| Category | Dock Seals & Pads |
|---|
Need help choosing the right equipment?
Tell us your requirements and we’ll recommend the best-fit configuration and provide pricing.
Related Products
More options from the same category and similar equipment.
Dock Seal Draft Blockers
Dock Seal Draft Blockers. Listed models: DRAFT-18, DRAFT-24, DRAFT-36; DRAFT-18 Overall Size (WxLxH): 18"x12"x9".
Dock Seal Shelter Combinations
Dock Seal Shelter Combinations. Listed models: D-150/650-10, D-150/650-11, D-150/650-12, D-150/650-13 and additional configurations; D-150/650-10 Projection: 10".
Dock Seal/Shelter Combinations
Dock Seal/Shelter Combinations — Dock Seals & Pads. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run-off.
Explore More Categories
Category-first browsing helps you compare specs fast.
Explore More
Browse related equipment and request a quote when you’re ready.
Ready for pricing?
Send your requirements — we’ll follow up quickly with options and lead time.
FAQ
What details are listed for Dock Seals?
The catalog lists Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon; Chemically sealed ends prevent moisture infiltration; Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Review the specification and feature sections, then confirm the selected configuration before ordering.
What should I check before selecting Dock Seals?
For Dock Seals, check dock height, door opening and vehicle dimensions; the load and traffic pattern at the loading position; mounting conditions and required installation clearances. Confirm suitability for your specific task with the equipment documentation.
How do I request a quote for Dock Seals?
Use Request a Quote on this page and reference Dock Seals (catalog reference 5921). Include quantity, intended use, required configuration, delivery address and needed-by date. Pricing, availability and delivery are confirmed in the quote.