Lift and Tilt Table

Description

Lift and Tilt Table

Lift and Tilt Table Features:

• All scissors rollers are captured within structural steel channels to provide excellent load stability.
• High impact, spiral wound bearings at every pivot point provide maintenance-free, rugged resistance to abrasion, impact, and uneven loads.
• Structural cross-members at every pinned joint in the scissors assembly minimize leg deflection due to twisting or spreading under high or uneven loading.
• All hydraulic cylinders contain two-piece, self-aligning piston rods that transmit minimal side forces to the cylinder hinges/pins, significantly reducing wear.
• Structural steel channels in all upper and lower frames provide additional rigidity and resistance to twisting and bending of the lift under load.
• Solid steel legs and added stiffeners provide overall stability and straight, repeatable roller tracking as the lift raises and lowers.
• Joints, the most critical wear points in the lift, feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
• Minimum 1/4-inch-thick steel-reinforced platform minimizes deck deflection, maximizes load stability, and greatly extends the life of the platform deck.

Maintenance and Warranty

• IML offers an industry-best 2 year warranty on all parts as a promise that you’ve purchased the industry’s most reliable work station tilter.
• On-board maintenance devices enable maintenance crews to safely and effectively block open the scissors during inspection and routine maintenance.
• Sturdy, semi-transparent polyurethane oil reservoir provides an easily visible method of checking fluid levels and eliminates oil contamination due to rust.
• Low pressure hydraulic circuit extends the life of all hydraulic components and puts less stress on the electric motor.
• Double wire braided Parker hydraulic hoses resist wear, abrasion, and leaks.

Simplicity

• Non-intrusive design minimizes floor space requirements for the operator
• Extremely low collapsed height increases its total ergonomic range.
• Standard controls are prewired and internal power unit is onboard. Installation simply includes lagging the unit to the ground and connecting to electricity.

Safety

• Non-intrusive design keeps the load centered over the base frame of the lift at all times.
• Hydraulic velocity fuses completely stop lifts in the unlikely event of uncontrolled descent due to sudden hose rupture.
• Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
• Compliance with recognized standards:
  • ANSI MH29.1 – Safety Requirements for Industrial Scissor Lifts
  • ANSI MH29.2 – Safety Requirements for Industrial Tilters
  • NFPA 70 – National Electric Code
  • ASTM – A36 – Structural Steel Standard
  • ANSI Z535 – Safety Labeling Requirements
  • AWS D.1 – Welding Standards
  • Applicable portions of OSHA 29CFR1910 – General workplace safety

Lift and Tilt Table Dimensions:

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (727) 490-8839.